INVT Goodrive 200A, Руководство по эксплуатации

Страница: 18 / 162

Goodrive200A inverters Installation guidelines
13
Environment Conditions
The maximum relative humility should be equal to or less than
60% in corrosive air.
Storage
temperature
-30~+60
℃
Running
environment
condition
The installation site of the inverter should:
keep away from the electromagnetic radiation source;
keep away from contaminative air, such as corrosive gas, oil mist
and flammable gas;
ensure foreign objects, such as metal power, dust, oil, water can
not enter into the inverter(do not install the inverter on the
flammable materials such as wood);
keep away from direct sunlight, oil mist, steam and vibration
environment.
Altitude
Below 1000m
If the sea level is above 1000m, please derate 1% for every
additional 100m.
Vibration ≤ 5.8m/s
2
(0.6g)
Installation direction
The inverter should be installed on an upright position to ensure
sufficient cooling effect.
Note:

Goodrive200A series inverters should be installed in a clean and ventilated
environment according to enclosure classification.

Cooling air must be clean, free from corrosive materials and electrically conductive
dust.
4.2.2 Installation direction
The inverter may be installed on the wall or in a cabinet.
The inverter must be installed in an upright position. Check the installation site according to
the requirements below. Refer to chapter Dimension Drawings in the appendix for frame
details.
Fig 4-1 Installation direction of the inverter