36
9.4. Copying files from the IDL7000 to a USB device
1. Enter the library by pressing “Library” button on the remote control. If this
is a USB2 external storage device like a USB2 memory stick, or USB2 Hard
Disk Drive, a list of available storage devices will be displayed like below.
2. Select “Internal Storage” from the available storage devices list. At this
stage you can navigate within the folder, where the fi les to be transferred
are located.
3. Select the “Archive/Move” function by pressing the “menu” key to switch
to fi le selection mode:
4. Select the fi les to be transferred. You can use the “Mark block begin” and
“Mark block end” functions (green remote button) and/or “Mark single” (blue
remote button) to select the fi les.
