10
Changing the program on your receiver (Programme selection)
You can use the numeric keys (20) on your remote control.
•
You can use the directional keys (7) “Up” and “Down” on your remote control or on the front panel of the receiver.
•
You can use the Ch+ and Ch- keys (13) on your remote control
•
Scroll through the programme list by pressing the “TV” key (3), select with the navigation key “Up” or ”Down” the programme list,
•
and confi rm the selection with “OK” key (6).
Changing volume level
Use the /- keys on the remote control. Optionally, you can also use the directional keys “Left” and “Right” on your remote
control or on the front panel of the receiver, while watching a TV programme.
Recording TV/Radio programmes:
From the Current Programme:
To record a broadcast programme, you can press the red “REC” (28). key. From this instant, the program is recording onto the
built-in hard disk. You can stop the recordings with the “STOP” key (27). A message appears if the recording ends. If more than one
recording is running you can stop one by selecting it using the “Up” or “Down” keys (7) and pressing “OK“ (6) to confi rm it. For this
function, you can use keys on your remote control or on the front panel of the receiver.
From the EPG:
Press the “GUIDE” key (19), the EPG (Electronic Program Guide) appears. Here you can fi nd a list of the actual programmes to be
broadcast, if the channel information is available. The availability of the EPG information also depends on how far into the future the
broadcaster supplies the data.
Select the desired programme with the navigation keys “Right”, “Left”, “Up” and “Down” (7). The selected programme is highlighted.
By pressing the “REC” key (28), you can add the selected programme into your Personal Planner for further processing, such as
scheduling an automatic recording.
Time shift:
If you are interrupted while watching a TV program, just press the “Pause/Play” key (26). From this moment, your programme will
be recorded on the built-in hard disk. On the screen, you will see a frozen picture, like the one you have when you press pause on a
VCR, as well as the time-shift counter. By pressing the “Pause/Play” key (26) again, the programme will start again, continuing from
where you have stopped.
Note:
During recordings, a red dot with the programme name is displayed on the upper part of the TV screen. The maximum number of
simultaneous recordings is two, plus one time shift. This information will disappear automatically within the OSD-timeout, by pressing
the “Blue” function key (24). you can make it visible again for another OSD-timeout period.
Viewing recorded programmes
Press the “Library” key (5), a list of the recorded programmes appears. Select with the directional keys “Up” and “Down” the desired
programme and press “OK” (6) or “Pause/Play” key (26). Use the “Exit” key (22) to exit the library.
2. Basic Operation:
