Then, in the
Channel
tab select the appropriate output which will be enabled in the
external device or – select type of the message.
The user can choose the following fields:
•
TCP Ch:x
– the function uses
the connection protocol
i.e. the TCP protocol.
Number
Ch:x
is selected output channel in an external device, e.g. LanTick, which
will be enabled when the channel state of the local device changes. The TCP frame
sends in the
format #1
,
•
UDP Ch:x –
the function uses
the connectionless protocol
i.e. the UDP
protocol. Number
Ch:x
is selected output channel in an external device, e.g.
LanTick, which will be enabled when the channel state of the local device changes.
The UDP frame sends in the
format #1
,
•
Status
– sends the device channel status, TCP frame sent in the
format #2
,
•
MAC+Status
– sends the MAC address of the device and current channel status,
TCP frame sent in the
format #3
,
•
HTTP GET –
sends the MAC address of the device and current channel status,
frame sent in the
format #4
.
User manual Nano Relay Output PoE / Nano Relay Output
Page
18
of
29
[B02a]
