7.4
SNMP configuration
The module is equipped with an SNMP v2c server.
To enable this feature go to
Administration
tab and check
Enable
SNMP
option.
The SNMP protocol allows to read the current value.
The MIB file describing the structure can be downloaded the
SNMP
tab.
To use the SNMP protocol, save the MIB file by right-clicking on the
Download MIB file
link. Then select the
Save
link
as
option. Download the file to the MIB Browser program.
The basic parameters that can be read from the Nano Relay Output module can be found
in the table:
Name
Format
OID
State of the input channel
INTEGER
.1.3.6.1.4.1.42814.14.3.1.1.0
State of the counter
INTEGER
.1.3.6.1.4.1.42814.14.3.2.1.0
Module can send TRAP messages when the
input channel is changed
. Destination address
should be entered in
Trap IP Address 1
and
Trap IP Address 2
fields.
User manual Nano Relay Output PoE / Nano Relay Output
Page
21
of
29
[B02a]
