In the
Network
tab it is possible to change LAN parameters.
To change the network settings, use the following fields:
•
Host Name
– NETBIOS name,
•
DHCP
– checking this box forces use of the address assigned by the DHCP server,
•
IP Address
– the IP address of the reader,
•
Gateway
– network gateway,
•
Subnet Mask
– IP subnet mask,
•
DNS1, DNS2
– DNS servers addresses.
•
Destination IP –
the IP address of the server or of the external device
in the M2M connection (chapter 7.3),
•
Destination Port –
the listening port of the server or of the external device
in the M2M connection.
After all changes, select
Save Config
.
User manual Nano Relay Output PoE / Nano Relay Output
Page
13
of
29
[B02a]
