inveo Nano Relay Output, Руководство пользователя

Страница: 22 / 29

7.5 Windows command line software
The input state can be check by Windows command line.
To use the Windows command line, enable the
Program Access service in the
Administration tab.
Windows syntax:
TCPRel.exe [Parameters]
Parameter Description
-out=1 Output number
-host=[HOST] Module IP address
-port=[PORT] Module Port number
-on | -off Enable / disable the output
-verb Enabled display of additional info
-stat Displays current state of outputs
Example:
Enable relay, IP address 192.168.111.15, listening on port 9761:
TCPRel -out=1 -host=192.168.111.15 -port=9761 -on
7.6 Linux control program
The output state can be checked by Linux command line.
To use the Linux control program, enable the
Program Access service in the
Administration tab.
Syntax is as follows:
./TcpRel.exe [Parameters]
Parameter Description
-o 1 Output number
-h [HOST] Module IP address
-p [PORT] Module Port number
-s [0,1] Enable / disable the output
-l Display current output state
Examples:
Enable relay, IP address 192.168.111.15, listening on port 9761:
./tcprel -o 1 -h 192.168.111.15 -p 9761 -s
Checking output state:
./tcprel -h 192.168.111.15 -p 9761 -l
User manual Nano Relay Output PoE / Nano Relay Output Page
22 of 29
[B02a]