7.3
Destination Client (M2M)
Inveo devices as
LanTick, Nano Temperature Sensor, Nano Digital Input, Nano Relay
Output or others
are able to send information data to the server or to another
module with outputs
using the TCP or UDP protocol. It means that this another module
can react to activation of channel or when alarm occurs (Nano Sensors).
The message is sent each time state is changed and additionally every 5 seconds.
Configuration of devices receiving messages (external devices)
To enable the service, enter the
Administration
tab and select
Enable Program
Access
and confirm with the
Save Config
button.
Configuration of devices sending alarm status messages
To enable the service, enter the
Administration
tab and select
Enable Destination
Client
and confirm with the
Save Config
button.
In the
Network
tab, fill in the
Destination IP
and
Destination Port
fields.
The
Destination IP
field is an IP address of the external device or server.
The
Destination Port
field is a port number of the external device (9731 by default).
User manual Nano Relay Output PoE / Nano Relay Output
Page
17
of
29
[B02a]
