Rea® Dahlia® 30 / 45
5.
Tighten the screw
D
with 9 ± 1 Nm.
•
5 mm allen key
•
10 mm fixed spanner
WARNING!
Risk of injury
Poor brake effect
– Check the brake effect after mounting or
adjusting the brake.
F
E
G
H
6.
Mount the rear wheel axle
E
in the attachment
F
on
the frame. Attach the nut and spacer
G
and the screw
H
.
7.
Tighten the screw
H
with 9 ± 1 Nm.
8.
Tighten the nut
G
with 22 Nm.
•
Allen key 5 mm
•
Fixed spanner 19 mm
9.
I
J
K
Mount the lever for the assistant maneuvered drum
brake
I
on the push handle and attach the screws
J
.
The distance between the handle and the lever
for the assistant maneuvered drum brake must
be 10 — 15 mm
K
.
Torx driver T20
2.19.2 Drum brake for 22–24”
1.
A
B
2.
Assemble the parts on the drum brake
A
in the order
shown above. Attach the screw and nut
B
to fixate
the parts.
C
D
E
F
Mount the wire hook from the brake handle in the wire
holder
C
. Mount the wire in the attachment washer
D
and place the wire in the lower notch on the brake
E
.
3.
4.
Tighten the nut
F
with 9 ± 1 Nm.
•
4 mm allen key
•
10 mm fixed spanner
G
H
I
J
K
G
H
I
J
K
Low rearwheel plate
High rearwheel plate
5.
Assemble the quick release axle
H
through the
rearwheel and the drumbrake with wire
G
.
6.
Assemble the wheel with drumbrake on the rearwheel
plate
I
.
7.
Attach the screw
J
and tighten with 9 ± 1 Nm.
8.
Attach the nut and sleeve
K
and tighten the nut with
40 ± 5 Nm.
9.
Repeat the procedure on the opposite side.
•
4 mm allen key
•
24 mm fixed spanner
WARNING!
Risk of injury
Poor brake effect
– Check the brake effect after mounting or
adjusting the brake.
10.
N
L
M
Mount the handle for the assistant maneuvered drum
brake
L
on the push handle and attach the screws
M
.
The distance between the handle and the handle
for the assistant maneuvered drum brake must
be 10 — 15 mm
N
.
T20 torx driver
14
1572308-G
Содержание REA Dahlia 30
Страница 51: ...Notes...