Assembly
2.17 Mounting the kerb lever
A
B
1.
Mount the kerb lever
A
on the chassis tube.
2.
Mount the screw and the nut
B
.
3.
Tighten the screw.
2.18 Mounting antitipper
WARNING!
Risk of tipping
– Max. height from floor to antitipper is 40 mm.
Min. height from floor to antitipper is 15 mm.
1.
A
B
Mount the antitipper
A
in the chassis tube
B
2.
C
Use a rubber mallet
C
to insert the antitipper in the
chassis tube.
CAUTION!
Damage on the antitipper tube
– Do not use the rubber mallet on the
antitipper tube, only on the top of the
attachment.
3.
D
Secure the antitipper with the screw
D
.
4.
Tighten the screw.
5.
Repeat the procedure on the opposite side.
Torx driver T25 or screw driver
See the part “Size of Antitipper device” in the
Technical Data section for information about the
sizes.
2.19 Mounting the drum brake
2.19.1 Drum brake for 16” wheels
1.
Assemble the screws, washers and nut as shown in the
picture above.
A
B
C
D
2.
Mount the wire hook from the brake handle in the wire
holder
A
.
3.
Mount the wire in the attachment washer
B
.
4.
Place the wire in the lower notch on the brake
C
.
1572308-G
13
Содержание REA Dahlia 30
Страница 51: ...Notes...
