Settings and Adjustments
Pos 1 — 16”–22” wheels
Pos 2 — 22”-24” wheels
Pos 3 — 16”-20” wheels
Pos 4 — 16”-20” wheels
See “Seat height tables” in section “Technical data”
for a more detailed information.
Change position
Change position from an upper placement of the attachment
(pos 1 and 3), to a lower placement (pos 2 and 4):
B
A
C
1.
Loosen and remove the screws
A
and the nuts
B
.
2.
Remove the brake attachment with the brake
C
from
the chassis.
6 mm Allen key
F
D
E
3.
Loosen and remove the screw and the washer
D
.
6 mm Allen key
4.
Remove the brake from the brake attachment
F
.
5.
Be careful not to loose the nut
E
which is located inside
the brake attachment
F
.
F
F
6.
Turn the brake attachment
F
180 degrees.
6 mm Allen key
F
E
D
7.
Re-mount the brake on the turned brake attachment
F
.
8.
Remember to re-insert the nut
E
if this was removed
from the attachment.
9.
Re-mount the screw and the washer
D
.
10. Tighten the screw with 10 Nm.
A
B
C
11. Re-mount the brake and the attachment
C
on the lower
position on the chassis.
12. Re-mount the screws
A
and the nuts
B
.
13. Tighten the screws with 5 Nm.
6 mm Allen key
When changing the position from pos 1–3 or pos
2–4, steps 3–10 are excluded.
3.22 Adjusting the brake effect
Brake type 1
A
C
B
The distance
A
between the pin
B
and the tire
C
should be max. 2 mm.
1572308-G
35
Содержание REA Dahlia 30
Страница 51: ...Notes...
