Invacare REA Dahlia 30, Руководство по обслуживанию

Страница: 22 / 52

Rea® Dahlia® 30 / 45
1. Loosen and remove the screw E .
2. Remove the antitipper
D
.
3. Loosen and remove the screws A .
When using the high rearwheel attachment, also
remove the reinforcement plate.
4. Remove the attachment nut C and the rearwheel
attachment B .
• 5 mm allen key
• 25 mm torx driver
2.26 Mounting the one—arm drive
A
C
B
D
E
1. Mount the rearwheel attachment nut A .
2. Attach the rearwheel attachment B and the screws E
to fixate the rearwheel attachment.
3. Tighten the screws with 22 Nm.
4. Mount the antitipper C and the screw D .
5. Repeat the procedure on the opposite side.
• 5 mm allen key
• T25 torx driver
F
6. Mount the quick release attachments
F
and the nuts
and washers.
7. Tighten the nuts with 40 ± 5 Nm.
27 mm fixed spanner
G
The quick release knobs G must be pointing
backwards when mounting the quick release
attachments.
8.
F
Pull the quick release knob F outwards and mount the
rearwheels in the quick release attachments.
9.
H
Mount the telescopic rearwheel shaft H on the
rearwheel axles and release the pressure to fixate the
shaft.
Removing the rearwheel
WARNING!
Risk of injury
– Always remove the telescopic rearwheel shaft
before removing the rearwheels.
WARNING!
Risk of injury
The wheels come off
– Check that the quick release knob has locked
the wheel when you let go of the button. Test
this by trying to pull the wheel off. This should
NOT be possible.
H
G
1. Remove the telescopic rearwheel shaft H .
2. Remove the rearwheels.
Pull the quick release knob
G
outwards to release
the wheel.
22 1572308-G