![background image](http://html1.mh-extra.com/html/invacare/rea-dahlia-30/rea-dahlia-30_service-manual_2083579027.webp)
Settings and Adjustments
3.
Loosen the handle
D
.
4.
Remove the screw and the handle.
5.
Rotate the headrest / neckrest attachment pole including
the attachment
E
.
6.
Return the headrest / neckrest to the attachment.
Note that the screw to the headrest / neckrest
attachment
C
and the handle
D
must be mounted
on the opposite side due to the groves in the screw
hole.
7.
Return the headrest / neckrest to the attachment on
the backrest.
8.
Re-tighten the handle
D
.
3.5 Adjusting the user operated tilt
1.
A
Adjust the tilt resistance with the adjustment nut
A
on the wire.
2.
B
C
Fixate the wire in the holder with the fixation nut
B
.
When the desired tilt resistance is achieved, fixate the
position with the fixation nut
C
.
3.6 Backrest angle — rigging screw
A
B
1.
To adjust the angle of the backrest, first loosen nuts
A
on the rigging screw.
Tools: 17 mm fixed spanner.
2.
Turn the metal tube
B
to set the desired angle for the
back.
3.
Re-tighten the nuts.
CAUTION!
Risk of discomfort for the user
The low pivot point causes shearing when the
back is reclined, this might result in discomfort
for the user.
– Make sure that the user is well positioned after
each adjustment.
3.7 Armrest
3.7.1 Adjusting the armrest height
A
1.
Adjust the height of the armrests and / or side rests by
turning the screw or the hand wheel
A
depending on
which type of armrest you have chosen.
2.
Set the required height.
3.
Re-tighten the screw / hand wheel.
CAUTION!
Risk of trapping fingers
– Be careful not to trap your fingers between the
armrest / side support pad and the armrest
attachment when adjusting the armrest height.
1572308-G
27
Содержание REA Dahlia 30
Страница 51: ...Notes...