Intimidator eNVy neighborhood vehicle Скачать руководство пользователя страница 121 | Manualshive

Страница: 121 / 128

background image

Summit Series

®

II

User’s Manual

ATTENTION: N

E PAS UTILISER LE CHARGER PENDANT QUE L’EQUIPMENT EST EN MARCHE.

WARNING: LEAD-ACID BATTERIES GENERATE GASES WHICH CAN BE EXPLOSIVE. TO

PREVENT ARCING OR BURNING NEAR BATTERIES, DO NOT DISCONNECT THE CHARGER DC
OUTPUT FROM THE BATTERIES WHEN THE CHARGER IS OPERATING. KEEP SPARKS, FLAME,
AND SMOKING MATERIALS AWAY FROM BATTERIES.

WARNING: ALWAYS SHIELD EYES WHEN WORKING NEAR BATTERIES. DO NOT PUT

WRENCHES OR OTHER METAL OBJECTS ACROSS BATTERY TERMINALS OR THE BATTERY TOP.
ARCING OR EXPLOSION OF THE BATTERY CAN RESULT!

WARNING: DO NOT DISCONNECT THE CHARGER DC OUTPUT CONNECTOR FROM THE

BATTERY CONNECTOR WHILE A CHARGE CYCLE IS IN PROGRESS. THE RESULTING ARCING AND
BURNING OF THE CONNECTORS COULD CAUSE THE BATTERIES TO EXPLODE.

CAUTION: TO AVOID DAMAGE TO THE CHARGER DC CABLE AND CONNECTOR AND BATTERY

CONNECTOR,  DISCONNECT  BY  GRASPING  THE  CHARGER  CONNECTOR  HANDLE  OR  BODY  AND
PULLING  IT  STRAIGHT  OUT  OF  THE  BATTERY  CONNECTOR.    DO  NOT  PULL  ON  THE  CHARGER
CABLE.  DO NOT TWIST, ROCK, OR PULL THE CONNECTOR SIDEWAYS.

The instructions printed on the charger are for daily reference.

11.1 Off-Board Charger Operation

If the charger was configured for off-board use, follow these operating instructions:

1. With the charger DC output connector/plug disconnected from the battery connector/receptacle, connect

the charger AC power cord to an appropriate AC outlet (if not already connected) and the blue "AC

PRESENT" LED will turn on

.

2. Connect the charger DC output connector/plug to the battery connector/receptacle. The charger will start

automatically, which is indicated by the yellow "CHARGE STATUS" LED beginning to blink slowly.

3. If the charger must be disconnected from the battery while a charge cycle is in progress, first disconnect

the AC power cord from the AC outlet. Do not disconnect the charger DC output connector/plug from the

battery while a charge cycle is in progress.

4. The charge cycle 80% point is indicated by the yellow LED beginning to blink quickly.

5. The Finish charge cycle phase is indicated by the solid illumination of the yellow LED. Not all charge

profiles include a Finish phase.

6. An extended Balance/Equalize charge cycle phase is indicated by the green "CHARGE COMPLETE"

LED beginning to blink quickly. Not all charge profiles include a Balance/Equalize phase.

7. The charger automatically terminates the charge cycle when a battery reaches full charge, which is

indicated by [1] the solid illumination of the green LED or [2] the green LED beginning to blink slowly

indicating a post-charge phase. The required charge time is affected by numerous factors, including

battery amp-hour capacity, depth of discharge, battery temperature, and battery age/usage.

8. Before operating the machine/equipment, disconnect the charger DC output connector/plug from the

battery connector/receptacle by firmly grasping both connectors and pulling them straight apart.

121

«
...
119
120
121
122
123
...
»

Содержание eNVy neighborhood vehicle

































































































































Отзывы:

Нет отзывов

Похожие инструкции для eNVy neighborhood vehicle

Бренд: BaByliss Страницы: 56

Бренд: Valor Страницы: 4

Бренд: Scarlett Страницы: 23

Бренд: Sunbeam Страницы: 32

Бренд: Valor Страницы: 9

Бренд: Easy@Home Страницы: 47

MULTIQUICK FS20

Бренд: Braun Страницы: 125

Oral-B PRO 4000

Бренд: Braun Страницы: 24

Бренд: H.Koenig Страницы: 35

Бренд: Clarke Страницы: 12

Бренд: Morgan Страницы: 4

Бренд: Stadler Form Страницы: 44

Бренд: Tylo Страницы: 30

Sense Combi-U 8

Бренд: Tylo Страницы: 80

Бренд: STIEBEL ELTRON Страницы: 20

Бренд: Nailor Страницы: 4

Norel LM Series

Бренд: Adax Страницы: 2

Бренд: Helios Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды