Intimidator eNVy neighborhood vehicle Скачать руководство пользователя страница 113

Страница: 113 / 128

Summit Series

User’s Manual

4. OFF-BOARD (SHELF) VERSUS ON-BOARD (BUILT-IN) CHARGERS

This section describes how the charger operates when the charger type is set to Off-board or On-board.

Based on your application, this setting can be changed via the ChargerConnect app under “System Profile”

(see Section 8).

The charger was factory-configured with the active battery profile that was requested as part of the original

order from Lester Electrical. The charger was also factory-configured for mounting on-board a battery-

powered vehicle/machine or for off-board use in a shelf or portable application per the original order from

Lester Electrical. Before (1) using the charger for the first time or (2) using the charger with a battery pack of

a different type or capacity, use the ChargerConnect app to verify that the proper active battery profile is

selected and that the system settings match your application (see Section 8).

4.1 Off-Board Chargers

Off-board chargers are designed to be used in shelf or portable applications. If the AC input plug is

connected to AC power, a new charge cycle automatically starts when the DC output is connected to a

battery pack of the proper voltage. Disconnecting and reconnecting AC power while the DC output remains

connected to a battery pack WILL NOT automatically start a new charge cycle. Disconnecting the DC output

from the battery pack IS REQUIRED to automatically start a new charge cycle.

4.2 On-Board Chargers

On-board chargers are designed to be mounted on electric vehicles/equipment. If the DC output is connected

to a battery pack of the proper voltage, a charge cycle automatically starts when the AC input plug is

connected to AC power (unless a safety period of time has not passed since the successful completion of the

previous charge cycle). Disconnecting the DC output from the battery pack IS NOT REQUIRED to

automatically start a new charge cycle.

5. AC INPUT

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DISCONNECT AC POWER

FROM THE CHARGER BEFORE INSTALLING OR REMOVING UNIT.

The charger has an AC input rating of 100-240 volts, 50-60 hertz, single-phase.

The charger has an AC operating range of 85-265 volts, 45-65 hertz. Below 108

volts, the charger may reduce output power.

The charger is equipped with an IEC 60320 C16 inlet for the AC input power as

shown. This allows the AC power cordset to be selected with a proper plug

compatible with local electrical codes. The AC power cordset must be a

minimum of 16 AWG (1.5 mm

) on 120Vac inputs or a minimum of 18 AWG (1.0

) on 240Vac inputs. An AC cord clamp is also included to retain the AC power cordset IEC 60320 C15

connector. Loosen the screw on the side of the clamp as shown before inserting the C15 connector. Fully

insert the connector into the charger inlet and then tighten the AC cord clamp screw to secure the AC power

cordset to the charger.

The charger must be grounded to reduce the risk of electric shock and is equipped with an IEC 60320 C16

inlet having an equipment-grounding conductor and a grounding socket. The installed AC power cordset

must be plugged into an outlet that is properly installed and grounded in accordance with all applicable

electrical codes and ordinances.

If this charger includes the UL Listed symbol on its ratings label, it is provided with a cord set for connection to

outlets operating at nominal 120 volts (or 240 volts as appropriate). If the input plug does not fit the power

outlet, contact Lester Electrical for the proper cord set terminating in an attachment plug of the proper

configuration for the power outlet.

113

Содержание eNVy neighborhood vehicle

































































































































Результаты поиска

Содержание eNVy neighborhood vehicle

Отзывы:

Похожие инструкции для eNVy neighborhood vehicle

Бренды по названию

Популярные бренды

Intimidator eNVy neighborhood vehicle, Руководство пользователя

Результаты поиска

Содержание eNVy neighborhood vehicle

Отзывы:

Похожие инструкции для eNVy neighborhood vehicle

Бренды по названию

Популярные бренды