Intimidator eNVy neighborhood vehicle Скачать руководство пользователя страница 119

Страница: 119 / 128

Summit Series

User’s Manual

CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY

RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

part 15 of the FCC and ICES-003 Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense. The Bluetooth wireless module operates at a frequency range of 2402.0 -

2480.0 Mhz and has an output wattage of 0.008.

9. EXTERNAL PORT

The charger has an external port with a DB9 (DE9) connector (sealed internally)

located on the DC terminal block end of the unit which is used for an optional remote

LED, CANbus communication cable assembly, or other OEM specific cable assembly.

When this port is not used, leave the protective cover over the connector to keep

moisture and debris out of the connector. For harsh environments, add dielectric

grease to the DB9 port before attaching mating connector.

When mounting the charger on-board a vehicle where the charger

LEDs are not visible, an optional remote LED cable assembly can

be used. Attach the remote LED cable assembly to the external

port on the charger and hand tighten the connector mounting

screws. The LED end of the cable assembly is to be rear mounted

through a hole on the vehicle or it can be attached to a panel which

mounts to the vehicle. Install the remote LED assembly as shown

and attach the accompanying decal. Remote LED blink patterns

are detailed in Section 12.3.

10. PROPER CARE OF DEEP-CYCLE LEAD-ACID MOTIVE POWER BATTERIES

Motive power battery packs are subjected to severe deep-cycle duty on a daily basis. Although these

batteries are designed to withstand such duty, the following precautions must be observed to obtain good

performance and maximum cycle life.

CAUTION: ALWAYS WEAR PROTECTIVE EYE SHIELDS AND CLOTHING WHEN WORKING WITH

BATTERIES. BATTERIES CONTAIN ACIDS WHICH CAN CAUSE BODILY HARM. DO NOT PUT
WRENCHES OR OTHER METAL OBJECTS ACROSS THE BATTERY TERMINAL OR BATTERY TOP.
ARCING OR EXPLOSION OF THE BATTERY CAN RESULT.

1. When installing new batteries, be sure the polarity of each battery and the overall battery pack is correct.

Otherwise, battery and/or charger damage can result.

2. New batteries should be given a full charge before their first use because it is difficult to know how long

the batteries have been stored.

3. New batteries and older batteries that have been in storage are not capable of their rated output until they

have been discharged and charged a number of times. Consult the manufacturer of your batteries for

more information.

4. DO NOT EXCESSIVELY DISCHARGE THE BATTERIES. Excessive discharge can cause polarity

reversal of individual cells resulting in complete failure shortly thereafter.

119

Содержание eNVy neighborhood vehicle

































































































































Результаты поиска

Содержание eNVy neighborhood vehicle

Отзывы:

Похожие инструкции для eNVy neighborhood vehicle

Бренды по названию

Популярные бренды

Intimidator eNVy neighborhood vehicle, Руководство пользователя

Результаты поиска

Содержание eNVy neighborhood vehicle

Отзывы:

Похожие инструкции для eNVy neighborhood vehicle

Бренды по названию

Популярные бренды