manualshive.com logo in svg

International VT 275 V6, Руководство пользователя

Поделиться
Скачать
International VT 275 V6 Скачать руководство пользователя страница 61

System Operation

•  Oil is drawn from the oil pan through

the pick-up tube, upper oil pan,
lower crankcase and the front cover
passage that leads to the oil pump
gear set. The oil is moved under
pressure by the crank-driven gear
set to the outlet port of the pump
where pressurized oil is exposed to
the pressure regulator valve. If the
pressure is high, the excess oil is
returned to the inlet side of the
pump. Oil then enters the vertical
passage in the crankcase that takes
the oil to the oil cooler cover.

• Oil entering the oil cooler cover is

directed to the cooler and oil cooler
bypass valve. If the oil is cold and
thick, the bypass allows oil to enter
the filter without moving through the
cooler. After passing through the
cooler, oil enters the oil adapter
assembly and is directed to the
filter. The top of the filter standpipe

contains the oil filter bypass valve,
which allows oil to bypass the filter
if the filter is restricted. After
passing through the filter, oil returns
to the cooler cover assembly and is
directed to the high-pressure pump
reservoir and the crankcase passages.

• Cooled and filtered oil enters two

oil passages at the top of the
crankcase. The right passage leads
to the right bank oil galley where oil
is directed to the crankshaft main
bearings, camshaft, right bank
lifters, and the right bank piston
cooling jets. The left passage leads
to the left bank oil gallery where oil
is directed to the left bank lifters
and cooling jets. Spray from the
cooling jets removes heat from the
crown of the pistons.

• Lubrication of the connecting rod

bearings is through drilled
passages from the main bearing
journals to the rod journals.

• Each lifter directs oil up the hollow

push rod to the rocker arm, where
oil from the push rod splash-
lubricates the rocker arm and valve
stem. The rear gear train is
lubricated by splash oil thrown off
the rear main bearing and drain oil
from the injection pressure regulator.

Oil

Pump

Pump
regulator
75 psi

Oil

cooler

Oil

filter

Cooler
bypass

Filter
bypass

Dual
turbocharger

To oil pan

Oil reservoir for

high-pressure

pump 0.95 qts

To high-pressure

oil system

Cam
bushing

Main
bearing

Rod
bearing

Piston

Cooling tube

Lifter

Right side

Left side

Diagnostic

port

EOPS

EOT

Primary

balancer

bushing

LUBRICATION SYSTEM

61

International

®

VT 275 V6 Engine

Содержание VT 275 V6

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды