International HS 2.8L, Руководство по обслуживанию

Страница: 43 / 130

International HS 2.8L Lubrication System
4 2
Service Manual - 8120081 - 05/02
INTERNATIONAL ENGINES
LUBRICATION SYSTEM
PREVENTIVE MAINTENANCE
The lubrication system is responsible for the
durability and internal cleaning of the engine.
Beyond of lubricating, the oil has the function of
absorbing the heat generated by the friction of the
mobile parts.
Level
Check oil level with the engine on a flat ground
and stopped.
1. Wait from 10 to 15 minutes to allow the oil
return from the upper part of the engine.
2. Remove oil dipstick and clean it with a clean
cloth, introduce it until the edge, remove it
again and check level, twice, to make sure of
the check.
Complete the oil level only if the oil mark is below
the dipstick lower mark, the difference between
the volume of the maximum mark and the
minimum mark is 1 liter. Always use oil of the
same specification.
Warning: If oil level is frequently low, seek
a distributor and / or authorized
service.
Lubricant oil and filter replacement
If the engine operates in regions with high dust
concentration, or other harmful conditions to the
good operation, it will be necessary to reduce the
replacement periods, filter and lubricant oil.
Note: After the first oil and filter change at 15,000 km (9,300 mi) or 6 months, prevailing which
one occurs first, lubricant oil must be replaced together with filter.
Warning: During drainage, lubricant oil is
hot and may cause burnings.