International HS 2.8L, Руководство по обслуживанию

Страница: 14 / 130

1 3
International HS 2.8L Operation and Maintenance Recommendations
8120081 - 05/02 - Service Manual
INTERNATIONAL ENGINES
2. Check the panel instruments, engine noise
and exhaust gases.
In case of any irregularity, stop the engine
and immediately look for our Distributors
Network and / or Authorized Services.
Note: Do not extremely load the engine, while it is not at the normal operation temperature.
Stop
Warning: Let the engine in idle speed and
transmission lever in neutral.
In turbocharged engines, in order to do not
damage the turbocharger shaft, the engine must
run during 30 (thirty) seconds under 1000 rpm
before stopped.
• Do not accelerate the engine.
• Turn key to “off” position.
RUNNING-IN
The technology that INTERNATIONAL ENGINES
SOUTH AMERICA LTDA uses on its engines
production, as well as on tests in dynamometer,
eliminate the necessity of large run-in periods.
Generally, it is considered the firsts 2500 km
(1550 mi) of work as the necessary period for the
run-in, which can vary according to each
application that each product is used.