International HS 2.8L, Руководство по обслуживанию

Страница: 121 / 130

International HS 2.8L
120
Additional Instructions
Service Manual - 8120081 - 05/02
INTERNATIONAL ENGINES
ADDITIONAL INSTRUCTIONS
INACTIVE ENGINES CONSERVATION
In order to avoid engine corrosion if it stays
inactive during long period, it is necessary to take
the following providences:
1. Clean correctly the outer parts of the engine.
2. Run engine up to the normal operation
temperature. Next, stop and drain oil from oil
pan.
3. Remove oil pan, clean oil suction pipe and
replace lubricant oil filter cartridge.
4. Clean breather pipe.
5. After to reinstall filter, fill oil pan up to the
maximum level, marked on lubricant oil
dipstick with SHELL ENSIS ENGINE MOTOR
oil.
6. Drain fuel tank and fill it with SHELL
CALIBRATION FLUID B oil.
7. Run engine until that it reaches normal
operation temperature.
8. Drain cooling water from engine and radiator.
9. Remove air filter or any extension of the
intake piping and seal air intake with adhesive
tape.
10. Remove exhaust pipe and seal exhaust
manifold, as well as intake manifold.
11. Disconnect battery and remove it for storage.
Warning: It contains acid, protect eyes
and hands.
12. Remove fan belt.
13 Complete battery level with distillated water.
Clean terminals, lubricate with grease and
complete charge. Do not use quick charge.
Stock in a fresh, dry and free of dust place.
Complete charge once a month.