Intermec Transaction Manager 9560, Руководство пользователя

Страница: 286 / 309

9560 Transaction Manager User’s Manual
G-8
echoplex
Communication environment in which full duplex terminals work. Any data
sent to the host is echoed back to the device that sent the data.
Edge Trigger mode
The laser only turns on or off when you pull the trigger–it completely ignores
the trigger release. Thus, if you pull the trigger, it will go on and stay on when
you release the trigger. Pulling the trigger a second time will cause the laser to
go off. If the laser is on, the timeout and number of decodes per trigger event
operate normally and will turn the laser off. Edge Trigger Mode is most often
used in remote triggering applications.
EEPROM
Electrically erasable programmable read only memory.
element
A single binary position in a character; dimensionally the narrowest width in a
character bar or space. A generic term used to refer to either a bar or a space.
encoded Area
The total lineal dimension occupied by all characters of a code pattern,
including the start/stop characters and data.
END
End of IRL Program/Compile character
Sent by the host to tell the reader that the IRL program has been downloaded.
Instructs the reader to compile the program and to wait for the RUN
command.
EOF
End of File character
Control character indicating the end a file. Attached to the last record
transmitted in a block of records and after the EOR, if the EOF character field is
enabled.
EOM
End of Message character
Sent at the end of reader messages and at the end of host messages. The
transmitted and received EOM characters can be defined separately.