Intermec Transaction Manager 9560, Руководство пользователя

Страница: 235 / 309

Interactive Reader Language
9-9
9
Unique IRL Commands for the 9560
The 9560 uses standard IRL 2.1 commands plus the Function Output
command for the sense inputs and relays.
IRL v2.1 and IRL v2.2 Differences
IRL 2.1 does not support the following IRL 2.2 and later commands and
operations:
YMP.<filename> File receive with protocol
YMN.<filename> File receive without protocol
Q, G, and S commands with these conditional operations:
>= Greater than or equal to
<= Less than or equal to
<> Not equal to
If you use any of these commands, the IRL program will not compile or run on
the 9560.
Note:
PC-IRL will compile these commands. If you create an IRL program in PC-IRL
with these commands and download it to the 9560, the program will not run on the
9560.
Function Output Command
You use the enhanced Function Output command (F) to control the relays and
determine the sense input status. This command is also known as the
LED/Relay Control command.
The F command performs the following functions:
• Controls the LEDs on a 9191 Satellite Wand Station, if connected
• Controls the 3 output relays
• Returns the status of the 3 sense inputs to the #0 register in the following
format:
The #0 register contains a 3-digit binary string
A 1 indicates a signal was detected; a 0 indicates no signal was detected