Intermec Transaction Manager 9560, Руководство пользователя

Страница: 66 / 309

9560 Transaction Manager User’s Manual
4-4
Starting the 9560 With the Magnetic Card Reader
The magnetic card reader requires the 9560 to have specific host
communication settings at power up. If you have not changed the host
settings, you will not have a problem. However, if you change the host settings
and the 9560 loses power, the reader may malfunction.
The internal magnetic card reader requires these host settings at power up:
• 9600 baud
• Even parity
• 7 data bits
• 1 stop bit
If these settings are not correct at power up, the 9560 beeps continually and the
magnetic card reader and the 9560 hang up. Use the following procedure to
correct this problem.
To set the 9560 to use the magnetic card reader on power up
1. Scan each of the following labels, or download the commands from the
host.
Labels Host Commands
9600 Baud
*$+IA6$-*
*$+IA6$-*
$+IA6$-
Even Parity
*$+IB1$-*
*$+IB1$-*
$+IB1$-
Data Bits 7
*$+II7$-*
*$+II7$-*
$+II7$-
Stop Bits 1
*$+IC1$-*
*$+IC1$-*
$+IC1$-
2. Turn off the power to the 9560, and then turn it on again.