Intermec Transaction Manager 9560, Руководство пользователя

Страница: 71 / 309

Operating the 9560
4-9
4
4. Practice using the wand on the following label. Be sure to hold the wand at
a slight angle. Lightly touch the label when scanning.
*LABEL*
*LABEL*
Using a Laser Scanner
You can use Intermec 1500 and 1600 series laser scanners with the 9560. Refer
to the documentation supplied with the laser scanner for specific operating
instructions, warnings, and cautions.
WARNING
Warning
Do not look directly into the window area while the laser is scanning. Long
term exposure to the laser beam can damage vision.
Avertissement
Ne regardez pas directement la région de la fenêtre pendant le passage du laser.
L'exposition à long terme au rayon laser peut endommager la vue.
To scan a label
1. Hold the scanner in the palm of your hand with the index finger resting on
the trigger.
2. Squeeze and hold the trigger to activate the scanner.
3. The spotting beam should fall across all bars and the “quiet zone” at each
end of the label. A quiet zone is a clean, nonprinted space. Use this drawing
as a guide.
*LABEL*
*LABEL*
The scan line must cross
every bar and space
on the symbol.
Correct
Incorrect
9560-16U
Quiet Zone Quiet Zone