Intermec Transaction Manager 9560, Руководство пользователя

Страница: 119 / 309

Configuring the 9560
6-13
6
Moving Around in Prompting Configuration Mode
You can move through all the parameters of a particular task or move through
the options within each parameter.
To move through Prompting Configuration mode
1. Decide which task to perform: select bar codes, set operating parameters, or
define host protocols.
2. Press Enter until the prompt for that task appears on the screen or terminal
display. Pressing Enter moves you to the next configuration prompt.
3. Press Space until the option you want appears on the screen. Pressing
Space cycles through the choices for the current prompt.
4. Press Enter to accept the currently displayed option. The prompt for the
next parameter is displayed.
Type Or Scan This Label To Do This
Ctrl E¤
*$+$+*
*$+$+*
Enter Prompting Configuration mode.
Enter
*%+*
*%+*
Move forward from one parameter to the next.
Bksp or Del
*%-*
*%-*
Move backward from one parameter to the
previous one.
Space
*%/*
*%b/*
Move through the parameter options. To select
the displayed option, press Enter. The new value
is stored in the buffer until you exit Prompting
Configuration mode.
Ctrl P
Treat the next character entered as data. You can
enter control characters into configuration
command strings.
?
*%J*
*?*
Enter Help mode.
Esc
*$-*
*$-*
Exit Prompting Configuration mode and save
your changes.
Ctrl Z
* *
*-.*
Exit Prompting Configuration mode without
saving your changes.
Note: You must set the 9560 for transparent or buffered display if you are using a CRT.