Intermec Transaction Manager 9560, Руководство пользователя

Страница: 37 / 309

Preparing to Install the 9560
2-9
2
Using the Output Relays
The 9560 includes three sense inputs and three single-pole, double-throw
output relays. You use these relays to actuate external devices, such as door or
turnstile locks. Each relay is rated as follows:
• 24V (AC or DC) maximum
• 1A maximum.
You control the relays with the IRL F command command. If you execute a
reset or remove power to the 9560, the relays turn off. The relays remain off
until the 9560 receives an F command. For more information on the F
command, see Chapter 9, “Interactive Reader Language.”
The following diagram shows the output relays in a typical application.
Sample Output Relay Application
Electric
Door
Opener
Secondary circuit of no
more than 24 VDC or VAC
and no more than 1A.
Terminal
Block
4 5
External
9560
1 2 3
Relay
9560-05U
Attaching Audio Output Devices
The 9560 contains a 0.138 inch (3.5 mm) audio jack for connecting an external
amplifier and speaker or headphones. When you plug a connector into the
audio jack, the internal speaker is disconnected.