1
Programming Quick Guide
-DC9257L:
Docking Scanner
-DC9267L:
Wearable Scanner
Docking Scanner:
Gently tap the trigger area at the middle of scanner, to enable the
scanner(for reading barcode)
Wearable Scanner:
Press the ring trigger to enable the scanner.
Up Side
Lower Side
The touch sensor area is around middle of the scanner as drawing shown.
Installation
They are Plug &Play USB (HID) devices. When plugged into your Android
OTG devices, it can be recognized as barcode scanner and begin to scan
the barcode. Before using scanner, make sure the smartphone or tablet
is fully charged. Open your APP, they can work as a keyboard input.
Reset Configuration to Default
(scan from 1 to 3)
1
0006010
3
0006000
2
0001160
Barcode Configuration Method:
(Flow chart for setup procedure
:
)
Start
Configuration
End
Configuration
0006010
0006000
Keyboard Country (For USB HID only)
Scan the appropriate country code as below to program the keyboard
layout for your country or language. As a general rule, the following
characters are supported, but need special care for countries other
than the United States: @ | $ # { } [ ] = / ‘ \ < > ~
1103001
1103002
USA
Japan
1103003
1103004
Denmark
Finland
1103005
1103227
France
UK
1103007
1103008
Italy
Norway
1103006
1103226
Turkey F
Turkey Q
Keyboard Country (For USB HID only)
Scan the appropriate country code as below to program the keyboard
layout for your country or language. As a general rule, the following
characters are supported, but need special care for countries other
than the United States: @ | $ # { } [ ] = / ‘ \ < > ~
1103202
1103222
Belgium
Spain
1103209
1103220
Germany
Austria
Russia
1103223
1103218
Sweden
Portugal
1D Symbologies – 1
ENABLE
UPC-E
DISABLE
0403020
0403010
ENABLE
UPC-A
DISABLE
0404020
0404010
ENABLE
Code 128
DISABLE
0400020
0400010
ENABLE
GS1-128
UCC/EAN-128
DISABLE
0412020
0412010
Trigger
Area
