Intermate Intermate 100, Руководство администратора

Страница: 72 / 257

Intermate100 and Intermate101 Print Server Administration Manual 72
HTTP (Browser): How to Change Settings on Configuration Pages
9.6. How to Change Settings on Configuration Pages
When you choose a menu item for configuration, you will be
presented with a page containing a number of parameters. In
some cases, a configuration page can require scrolling down
several screens. There are also some complex configurations
which are presented as a sub-group of menu items, each with
its own configuration page.
New settings for any given parameter are selected from a
drop-down menu, selected by choosing a radio button, or
typed into an input field. For many of the fields, you will find
printed texts showing valid ranges. You may also find an “on-
mouse-over”/”walk-over” description with additional information
on the parameter in question.
You can save some mouse-clicks by using the <Tab> key to
move from one parameter to another.
At the bottom of each configuration page are three buttons:
• “ Save & Cont. ” validates and saves the new settings.
You can save a mouse-click by using the < Enter> key
on your keyboard instead.
If you type an invalid value in an input field, the
configuration page will be replaced with a page telling with
the following message
“Error in input field '<parameter name>
Press the Browser’s Back Button”
When you do that, you will be presented with the
configuration page again. You will probably have to look in
the manual to correct your error.
• “ Undo ” restores the most recently saved settings. So if
you have already saved your current work, you cannot
use this button to move back to the previous values.
• “ Factory Default ” restores the default settings for the
parameters on the configuration page in question—and
only on that page.
Saved settings are not activated until you reboot; the next sec-
tion explains how to do this.