Intermate Intermate 100, Руководство администратора

Страница: 28 / 257

Intermate100 and Intermate101 Print Server Administration Manual 28
Windows 2000 and Windows XP: LPR
3
A little window will pop up present you with a choice of two
protocols. Choose “Intermate LPR” and click OK.
4
The little window will then present you with three fields to fill
out.
a
IP-address. Type in the IP-address for the print
server.
b
Print Queue: A default name
PAR_B
is shown.
This is a “binary” queue type which will print to
Logical Printer 0. See
“LPR Print Queues (LPD
Protocol)” [page 163] if you need information on
queue types or want to change the queue
name. See
“Services in “Input Control””
[page 159] if you need help to understand what
Logical Printer 0 is and how you can choose
another alternative.
c
Port Name: When you click on this field, a
name will be generated according to this
syntax:
<print queue name>:<ip address>
You can change this name
Finish by clicking OK.
5
The little window will close.
6
The main window will then shift back to the Add Printer
Wizard, where you will indicate the manufacturer and type
of printer.
7
If you already have a printer definition for this printer type,
you will be asked whether or not you want to keep the
existing driver. We advise your doing so. Should you want
to use a new driver or make other adjustments to the printer
definition, wait until you are finished with the “Add Printer”
procedure described here. Choose “Settings > Printer”,
right-click on the new printer you have defined, and choose
“Properties”.
8
You will be asked to “Name Your Printer.” If you have
several different “printer” definitions for the same physical
printer in your network, choose a name which will help to