Intermate Intermate 100, Руководство администратора

Страница: 101 / 257

Intermate100 and Intermate101 Print Server Administration Manual 101
IP Assignments for Initial Contact: Static IP Assignment Using the IMCU
• MAC Address
• Name (= Host Name - not changeable from within the
IMCU ; see instructions in “Host Name” [page 104] )
• Six settable parameters from the “TCP/IP” sub-group:
three fields to fill out (IP Address; Subnet mask;
Gateway) and three check-box fields: RARP, BOOTP
and DHCP.
7
Fill out the fields:
a
IP address.
b
If it is not possible for the print server to obtain
the mask from the network, you must type in a
Subnet Mask.
c
If automatic routing (RIP) is not used in your
environment, type in the Default Gateway.
8
Make sure the BOOTP and RARP protocols are disabled
(unchecked).
9
If you will are only using the IP address as a stepping stone
to DHCP, enable DHCP.
10
Conclude your work by clicking “Save and reboot”. You will
receive a confirmation message.
If you will be continuing your configuration without delay, you
have two choices.
Return to the “Device List” using the browser’s “back” button or
the “Device List” icon. Find your print server and double-click
on the “IP address” instead of the “MAC address”. This will
open a new browser instance attached to the Intermate1xx.
Log in from there. This is usually the best choice.
The alternative is to actually use the IMCU as a complete con-
figuration tool. Choose “Advanced” from the “Device Configu-
ration” window. The resulting screen (after a login) contains
links to all configuration pages, but the menu points have no
grouping. And there are no links to status or action pages, help
or contacts. This method should probably only be used if you
have a lot of experience configuring the Intermate1xx
.