Interlogix TruVision TVP-5101, Руководство по настройке

Страница: 49 / 79

TruVision IP Compact PTZ Camera Configuration Manual 47
Trigger Alarm Output Trigger external alarm outputs when an event occurs. Select
one of the options: Select Trigger Alarm Output, A->1, or A-
>2.
Note: This option is only supported by cameras that support
alarm output.
7. Click Save to save changes.
Intrusion detection
You can set up an area in the surveillance scene to detect when intrusion occurs. If
someone enters the area, a set of alarm actions can be triggered.
To set up intrusion detection:
1. From the menu toolbar, click Camera Configuration > Alarm/Event Setup>
Intrusion Detection .
2. Select Enable to enable the function.
3. Select Draw Area and then draw a rectangle on the image as the defense region.
When you draw the rectangle, all lines should connect end-to-end to each other. Up
to four areas are supported. Click Clear to clear the areas you have drawn. The
defense region parameters can be set up separately.
Note: The area can only be quadrilateral.
4. Choose the region to be configured.
Threshold: This is the time threshold that the object remains in the region. If you
set the value as 0, the alarm is triggered immediately after the object enters the
region. The range is between 0 and 10.
Sensitivity: The sensitivity value defines the size of the object that can trigger the
alarm. When the sensitivity is high, a small object can trigger the alarm. The range
is between 1 and 100.
Detection Target: You can select Human, Vehicle, or All (Human &Vehicle) as the
detection target from the dropdown list. If Human is selected, only people will be