Interlogix TruVision TVP-5101, Руководство по настройке

Страница: 20 / 79

18 TruVision IP Compact PTZ Camera Configuration Manual
To define the 802.1x parameters:
Note : The switch or router to which the camera is connected must also support the
IEEE 802.1X standard, and a server must be configured. Please apply and register a
user name and password for 802.1X in the server.
1. From the menu toolbar, click Camera Configuration > Network > 802.1X .
2. Check Enable IEEE 802.1X to enable the feature.
Note : Contact your network administrator for specific information on setting up this
function.
3. Configure the 802.1X settings, including EAPOL version, user name, and password.
The EAPOL version must be identical with that of the router or the switch.
4. Click Save to save changes.
To define the QoS parameters:
1. From the menu toolbar, click Camera Configuration > Network > QoS .
2. Configure the QoS settings, including Video / Audio DSCP, Event / Alarm DSCP
and Management DSCP. The valid value range of the DSCP is 0 to 63. The bigger
the DSCP value is the higher the priority is.
3. Click Save to save changes.
To define the FTP parameters:
1. From the menu toolbar, click Camera Configuration > Network > FTP .
2. Configure the FTP settings, including server address, port, user name, password,
directory structure, main directory, subdirectory, and upload type.
Directory: In the Directory Structure field, you can select the root directory, main
directory and tab. When the main directory is selected, you have the option to use
the Device Name, Device Number or Device IP for the name of the directory. When
the tab is selected, you can use the Camera Name, Camera No., or Custom as the
name of the directory.
Upload type: To enable uploading the snapshots to the FTP server.
3. Click Save to save changes.
To define the UPnP parameters:
1. Click Camera Configuration > Network > UPnP .
4. Check the checkbox to enable the UPnP function. Edit the friendly name of the
device when detected online can be edited.
4. Click Save to save changes.
To set up the Email parameters:
1. In Camera Configuration > Network > Email .
2. Configure the following settings:
Sender: The name of the email sender.