To set up a recording schedule:
1. From the menu toolbar, click
Configuration
>
Storage
>
Schedule Settings
>
Record Schedule
.
2. Select the
Enable
check box to enable recording.
Note:
To disable recording, deselect the option.
3. Click
Advanced
to set the camera record parameters. Select
Overwrite
to
overwrite the recording. Configure
Pre-record
,
Post-record
, and
Stream Type
.
Pre-record time
The pre-record time is set to start recording before the scheduled time or event. For
example, if an alarm triggers recording at 10:00, and the pre-record time is set as 5
seconds, the camera starts to record at 9:59:55. The pre-record time can be
configured as
No Pre-record
,
5s
,
10s
,
15s
,
20s
,
25s
,
30s
, or
Not Limited
.
Post-record time
The post-record time is set to stop recording after the scheduled time or the event.
For example, if an alarm triggered recording ends at 11:00, and the post-record time
is set as 5 seconds, the camera records until 11:00:05. The post-record time can be
configured as
5s
,
10s
,
30s
,
1min
,
2min
,
5min
, or
10min
.
4. Select a recording type from the drop-down list:
•
Schedule
: For scheduled recording.
•
Motion:
Video is recorded when the motion is detected.
•
Alarm
(Desktop cameras only):
Video is recorded when the alarm is triggered
via the external alarm input.
•
Motion | Alarm
(Desktop cameras only): Video is recorded when the external
alarm is triggered or motion is detected.
•
Motion & Alarm
(Desktop cameras only):
Video is recorded when motion
and
alarms are triggered at the same time.
•
Event
: Video is recorded if the configured alarms for events (cross line
detection, intrusion, or a desktop camera PIR alarm) are triggered.
5. Click and drag along the time bars or click on a time bar to configure recording
schedule times and alarm/event types.
42
TruVision 81 Series IP Camera Configuration Manual
