Server Port
: The default server port number is 8000. It can be changed to any port
number in the range from 2000 to 65535.
3. Type the IP address and port to upload the alarm information to the remote alarm
host. Also, select the
Notify Alarm Recipient
option in the Normal Linkage of each
event page.
4. Click
Save
to save changes.
To set up the NAT parameters:
Network Address Translation (NAT) permits automatic communication with a network
router.
1. Click
Configuration
>
Network
>
Basic Settings
>
NAT
.
2. Select the
Enable UPnP
check box to enable the NAT function.
3. Select
Auto
or
Manual
from the
Port Mapping Mode
drop-down list. When
Manual
is selected, click on an external port number to change it by typing in a new port
number.
Note:
If a non-default external port number is assigned, the network router settings
must be configured accordingly.
4. Click
Save
to save changes.
Advanced settings
Menu tabs
Description
1.
FTP
Enter the FTP address and folder to which camera snapshots can be
uploaded. See page 19 for setup information.
2.
Enter the email address to which messages are sent when an alarm
occurs. See page 19 for setup information.
3.
HTTPS
Specifies authentication of the website and its associated web server,
which protects against Man-in-the-middle attacks.
4.
QoS
QoS (Quality of Service) can help solve network delay and congestion by
configuring the priority of data sending. See page 21 for setup information.
18
TruVision 81 Series IP Camera Configuration Manual
