7. Click the
Arming Schedule
tab to edit the arming schedule. Click and drag along
the time bars or click on a time bar to configure arming schedule times.
Note:
All scheduled times are based on the 24-hour clock. Ensure that the correct
time zone and daylight saving time settings have been configured in
Configuration
>
System
>
System Settings
.
8. Click
to copy the schedule to other days by selecting the corresponding check
box next to the day.
9. Click
Save
to save changes.
10. Click the
Linkage Method
tab to specify the linkage method for when an event
occurs. Select one or more response methods for the system when an alarm is
triggered. See “Linkage methods” on page 31 for details.
11. Click
Save
to save changes.
Cross line detection
This function can be used to detect people, vehicles, and objects crossing a pre-defined
line or an area on-screen. The line crossing direction can be set as unidirectional or bi-
directional. Unidirectional is crossing the line from left to right or from right to left. Bi-
directional is crossing the line from both directions.
A series of linkage methods can be triggered if an object is detected crossing the line.
To define cross line detection:
1. From the menu toolbar, click
Configuration
>
Event
>
Smart Event
>
Cross Line
Detection
.
40
TruVision 81 Series IP Camera Configuration Manual
