Intergraph StudioZ GT, Руководство по установке, Страница: 83 / 88

73
Do the following after installation of the operating system:
♦
Install drivers or other system software from any backup diskettes. System software delivered
on backup diskette is usually more current than system software on the operating system CD-
ROM. Alternatively, you can install the drivers or other system software from the Windows
NT CD-ROM if you do not have them on diskette.
♦
If your system has a QLogic Fibre Channel host bus adapter, run
SETUP
.
EXE
from the backup
diskette to install the driver. See the
README
.
TXT
file on the backup diskette for more
information.
♦
Perform any additional installation and configuration tasks described in the Late-Breaking
News document delivered with your system.
♦
Configure the system as described in Chapter 3, “Configuring the System.”
♦
If your system was running Windows NT 4.0 Service Pack software, install this software after
installing drivers and other system software, and after installing any application software
products.
♦
Perform any operational changes required for your system as described in Chapter 4,
“Operating Notes.”
Do the following after you install Windows NT Service Pack software:
♦
If you created a Quick-Fix Engineering (QFE_NT*) backup diskette from Version Manager
during any previous initial system configuration, install the QFE update software. See the
README
.
TXT
file on the QFE diskette for more information.
♦
On a system with a Pentium III processor, reinstall Intel’s Streaming SIMD Extension Driver,
delivered in the
QFE
_
SSE
system software product. This driver increases system performance
for drivers and applications designed to take advantage of it. If
QFE
_
SSE
is not on your copy
of the Intergraph System CD-ROM, you can get it from the Support pages on the World Wide
Web (http://www.intergraph.com/ics). See the
README
.
TXT
file delivered with
QFE
_
SSE
for
more information.
♦
Complete the additional installation and configuration tasks in this section.
Configuring the Sound Driver
If you reinstall Windows NT and the associated system software and have an MPU-401 device or a
joystick, you must also install the appropriate drivers.
To install a compatible MPU-401 device driver:
1. Click Start, click Settings, and then click Control Panel.
2. Double-click Multimedia and click the Devices tab.
3. Click Add. The Add Driver dialog box displays.