Intergraph StudioZ GT Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 88

Intergraph StudioZ GT Скачать руководство пользователя страница 30

20

Preparing for System Software Setup

Your system’s primary system disk drive and any additional disk drives were formatted and
partitioned before shipment. In Explorer or My Computer, you can right-click a disk drive and
click Properties to display the drive’s partition size and file system format. To view partition and
format information for all disk drives, you can use Disk Administrator. See the operating system
documentation and Help for more information on these tools.

The operating system and associated system software is pre-installed on the system’s primary hard
disk drive. Installed system software includes the following:

♦

Driver software for the on-board SCSI controllers and the on-board network controller

♦

Driver software for the mouse

♦

Driver software for expansion cards installed at the factory, including (depending on your
system configuration) graphics controllers, audio controller, video processor, and other cards

♦

Core networking software and the NetBEUI protocol

♦

The latest certified Windows NT Service Pack software

♦

Quick-Fix Engineering (QFE) software, if needed

♦

InterSite software

Intergraph Computer Systems installs the operating system through Phase I of the operating system
Setup process. You must follow the operating system Setup process to prepare Microsoft
Windows NT for use.

Before you go through operating system Setup, have the following documents available:

♦

Microsoft’s Start Here document

♦

Documentation for the system’s graphics controller and network controller, and any expansion
cards you purchased.

♦

The Late-Breaking News document delivered with the system

Get and record the following information:

Your name, and the name of your company or
organization:

The Product Identification Number from Start
Here, the Certificate of Authenticity, or
registration card:

A username for a user account:

«
...
28
29
30
31
32
...
»

Содержание StudioZ GT

























































































Отзывы:

Нет отзывов