Intergraph StudioZ GT, Руководство по установке, Страница: 68 / 88

58
Summary Screen
This option displays the current system configuration when the system boots. The default setting is
Enabled.
Boot Device Priority
This option specifies the search order for the different types of boot devices. Select a device from
the list, and press the plus or minus keys to move the device up or down in the list. The default
order is: Removable, Hard Drive, ATAPI CD-ROM Drive, and Network Boot.
Hard Drive
This option causes the system to attempt to boot to the operating system from the first hard drive
on the list. If no operating system is found, the system tries the next drive on the list until the
operating system is located. The default setting is Bootable Add-in Card.
QuietBoot
When disabled, this selection displays the system diagnostics screen during boot up. When
enabled, the system logo screen displays in place of the system diagnostics screen. The default
setting is Enabled.
Multiboot
Use this option to display additional setup menus to configure system boot devices. Press
ENTER
to display the multiboot submenu. This submenu provides the following options:
Hard Drive
Selecting this option tells the system to boot from the system’s hard disk drive only.
Removable Devices
Selecting this option causes the system to boot from the specified order. To change the order,
highlight an option and use the plus or minus keys to move the option up or down in the list.
Security
Use this selection for additional setup menus to control the security functions of the system. To
enable the security feature, highlight this option and press
ENTER
to display a submenu.