Intergraph StudioZ GT, Руководство по установке, Страница: 22 / 88

12
Installed Expansion Cards
Expansion cards are installed as needed in the Accelerated Graphics Port (AGP), Peripheral
Component Interconnect (PCI), and Industry Standard Architecture (ISA) expansion slots in the
base unit. The layout of expansion slots, and the location of typical expansion cards installed in a
GT RAX system, is as follows:
Slot Type Expansion Card
0 (Left) AGP Graphics controller
1 PCI Graphics controller
2 PCI RAID controller or other expansion card
3 PCI Audio controller
4 PCI Fibre Channel host bus controller or other expansion card
5 PCI Fibre Channel host bus controller or other expansion card
6 PCI Fibre Channel host bus controller or other expansion card
7 (Right) PCI/ISA Video processor
For information on installing or connecting to expansion cards, see the System Reference and the
documentation delivered with the expansion cards.
Installing Removable Disk Drives
The following figure shows the disk drive bay door and door lock on the front of the system.
Door Lock
Disk Drive Bay Door