Intellinet 523868, Руководство пользователя

Страница: 47 / 56

2.3.3.20 GVRP
2.3.3.20.1 Clear GVRP Statistics
Use the “clear gvrp statistics” configuration command on the switch to clear all the GVRP
statistics information on one or all interfaces.
CLI Syntax: clear gvrp statistics [IFNAME]
Example: SWITCH# clear gvrp statistics gi1/0/2
2.3.3.20.2 Default GVRP Configuration
This command sets the GVRP configuration to default.
CLI Syntax: default gvrp configuration
Example: SWITCH# default gvrp configuration
2.3.3.20.3 GVRP Mode
This command sets the GVRP feature to globally be enabled or disabled on the switch.
CLI Syntax: gvrp mode (enable|disable)
Example: SWITCH# gvrp mode enable
2.3.3.20.4 Show GVRP Configuration
To show gvrp configuration IFNAME status.
CLI Syntax: show gvrp configuration IFNAME
Example: SWITCH# show gvrp configuration gi1/0/1
2.3.3.20.5 Show GVRP Statistics
To show gvrp statistics IFNAMe status.
CLI Syntax: show gvrp statistics [IFNAME]
Example: SWITCH# show gvrp statistics gi1/0/1
2.3.3.21 CoS/QoS
2.3.3.21.1 Queue CoS-Map
Use the “queue cos-map configuration” command on the switch to select the CoS queue that
a given priority should map into.
CLI Syntax: queue cos-map PRIORITY QUEUE
Example: SWITCH# queue cos-map 1 3
2.3.3.21.2 Show Queue CoS-Map
This command shows the information of CoS and priority mapping.
CLI Syntax: show queue cos-map
Example: (config)# show queue cos-map
2.3.3.21.3 QoS Mode
This command sets qos mode to highfirst mode.
CLI Syntax: qos mode high_first
Example: (config)# qos mode high_first
2.3.3.21.4 Show QoS Mode
This command shows the qos mode.
CLI Syntax: show qos mode
Example: (config)# show qos mode
2.3.3.21.5 QoS Egress Bandwidth
This command is used to set the QoS bandwidth informational parameter for the
outgoing packets.
CLI Syntax: qos egress bandwidth LIMIT_RATE BURST_RATE
Example: (config)# int gi1/0/2
(config-if)# qos egress bandwidth 100 10
47
COMMAND LINE INTERFACE