Intellinet 523868, Руководство пользователя

Страница: 25 / 56

2.2.7.3.2–6 Channel Group, Counters, Internal, Neighbor, Sys ID
Five additional screens (two shown) are available in this subsection for viewing various statistics
and data, such as Channel Group (above left) and Sys Id (above right).
2.2.7.4 Mirroring
Port Mirroring, together with a network traffic analyzer, helps you monitor network traffic. You
can monitor the selected ports for egress or ingress packets.
Mirror Mode:
enables or disables the mirror function for the selected group.
Stack ID: For a stand-alone switch, only Id “1” is available.
Monitor Port: Receives the copies of all the packets in the selected mirrored ports. NOTE: The
monitor port cannot belong to any link aggregation group, and cannot operate as a normal
switch port. It does not switch packets or do address learning.
Ingress, Egress, Both: Mirrors a port selected from the selection panel.
Click “Submit” to set the changes to the connected switch. Click “Refresh” to display the
values of the switch. To eventually make all changes permanent in Flash memory, click on
“Save Configuration” (listed at the bottom of the Configuration Menu) and click “Save.”
2.2.7.5 Static Multicast
This screen is for adding multicast addresses into the multicast table. The switch can hold up
to 256 multicast entries. All the ports in the group will forward the specified multicast packets
to other ports in the group.
25
WEb MANAgEMENT