Intellijel Tete, Руководство пользователя

Страница: 154 / 173

Tête + Tetrapad Manual
Editing Sequences
There are several ways to edit an existing sequence:
● Append ​ : use this method to create or extend a sequence.
The default state when pressing the
​
RECORD ( )
​
button while the sequencer is stopped.
● Overwrite ​ : use this method to overwrite any step or steps in an existing sequence.
● Insert
​
: use this method to insert a step between two existing steps.
● Overdub ​ : use this method to overdub while your sequence plays.
The state entered when pressing the
​
RECORD ( )
​
button while the sequencer is playing.
You can load any sequence as described in the ​ FILE Menu ​ discussion (or use the one you just
recorded).
Appending Sequences
You can extend the length of an existing sequence, and append more steps to it. To do so:
1. If the sequence is currently playing back, press the ​ PLAY ( ) ​ button to stop playback.
2. Press the
​
RECORD ( )
​
button.
The cursor in the piano/voltage roll moves to the end of the existing sequence.
3. Rotate Tête’s Encoder to define the gate parameters of the event you wish to enter.
For voltages, this means deciding whether to add a gate action or not.
For notes, it means deciding whether to add a rest, a tie/slur, or a note with a gate value of
25%, 50%, or 75%.
4. Touch the pad corresponding to the value of the note or voltage bank you wish to add.
Tête adds the note or voltage bank to the end of your sequence and advances it one step.
5. Continue adding steps until your sequence is the desired length.
Page 153