Intellijel Tete, Руководство пользователя

Страница: 112 / 173

Tête + Tetrapad Manual
CV Setup: SYNC Output
Assign a function to Tête’s
​
SYNC
​
output jack using the “Sync” setting in Tête’s CV Settings Menu.
The options are as follows:
● - (off)
​
: No signal is sent out the
​
SYNC
​
jack.
● Clock ​ : Outputs a +5V clock pulse regardless of whether or not a loop or sequence is currently
playing back. The clock signal being output is determined by Tête’s clock settings (i.e., either
‘internally’ generated at the prescribed value, or externally synchronized through the
​ CLK ​ input
jack).
● Run Clock ​ : Outputs a +5V clock pulse only when a loop or sequence is currently playing
back. The clock signal being output is determined by Tête’s clock settings (i.e., either
‘internally’ generated at the prescribed value, or externally synchronized through the
​ CLK ​ input
jack).
● Touch Clock ​ : Outputs a +5V clock pulse only when one of Tetrapad’s four pads is currently
being touched. The clock signal is output regardless of whether or not the loop or sequence is
currently playing back. The clock signal being output is determined by Tête’s clock settings
(i.e., either ‘internally’ generated at the prescribed value, or externally synchronized through
the
​ CLK ​ input ​ ​ jack).
● Play
​
: Outputs a +5V trigger pulse whenever the
​
PLAY ( )
​
button starts Sequence or Looper
playback.
● Stop
​
: Outputs a +5V trigger pulse whenever Sequencer or Looper playback is stopped by
long-pressing the ​ PLAY ( ) ​ button.
Note: Short-pressing (<1 sec) the
​
PLAY ( )
​
button only
​
pauses
​
playback; long-pressing it
stops
​
playback and returns the “playhead” to the beginning of the recording).
● Run
​
: Outputs a +5V gate whenever Tête is playing back a loop or sequence. The gate
remains high for as long as the loop/sequence is running.
● EOL/EOS
​
: Outputs a +5V trigger at the end of the currently playing loop or sequence.
● SOL/SOS ​ : Outputs a +5V trigger at the start of the currently playing loop or sequence.
● Touch
​
: Outputs a +5V trigger whenever any of Tetrapad’s four pads is touched.
NOTE: For more information about Tête’s clocking features, see
​
TEMPO Menu
​
.
Page 111