Intellijel Tete, Руководство пользователя

Страница: 135 / 173

Tête + Tetrapad Manual
Delete ​ : Select this option, then press the Screen Encoder to delete the highlighted
preset. This action brings up a confirmation screen, in which you rotate the Screen
Encoder to select between “Yes” and “No,” then press the Screen Encoder to confirm.
TEMPO Menu
Tête/Tetrapad features comprehensive clocking for
recording and playing back gestural performances in
either Looper (real-time) mode or Sequencer
(step-recording) mode. The clock may also be used for
other features, such as beat-synchronized LFOs and
Euclidean Rhythms, both of which are accessible within
Combo Mode. Tête’s tempo can be driven externally via
a clock plugged into its
​ CLK ​ input; or internally
generated by either tapping the ​ TEMPO ( ) ​ button, or
by entering the desired tempo manually.
To set Tête’s global tempo:
1. Long-press (>1 sec) Tête’s ​ TEMPO ( ) ​ button.
The screen displays the tempo source (Internal Clock vs. External Clock) and the current
tempo.
2. Press Tête’s Screen Encoder to toggle between
​
Internal Clock
​
and
​
External Clock
​
.
If set to
​
External Clock,
​
Tête will synchronize to the clock signal arriving
at its ​ CLK ​ input jack.
If set to
​
Internal Clock
​
, rotate Tête’s Screen Encoder to set the desired
tempo. To fine tune the Tempo setting (tenths of a BPM), rotate the
Screen Encoder while pressing it.
You can also set the tempo by tapping on the ​ TEMPO ( ) ​ button.
When you do so, the screen will say “
​
Tap Tempo
​
,” and Tête will
measure the tempo at which you tap, displaying the tempo in the
screen. You can tap any tempo from 20 - 480 bpm.
In all instances, the TEMPO button flashes in sync with the tempo.
3. Long-press (>1 sec) Tête’s ​ TEMPO ( ) ​ button to exit the TEMPO Menu.
Page 134