Intellijel Tete, Руководство пользователя

Страница: 119 / 173

Tête + Tetrapad Manual
● Rotate (Pad) ​ : Similar to the ​ Rotate ​ option, except CV control is not continuous. Rather, the
incoming CV is sampled each time you touch a pad, and is held until the next touch. This
enables you to synchronize rotations to touches on Tetrapad’s virtual keyboard.
● Inversion ​ : Inversion looks at the four outputs as if they formed a chord, and CV input inverts
the “chord” played by the 4 outputs. At approximately every +1.25V, the “chord” inverts. So if
you send 1.25V into the CV input, Out 1 transposes up one octave. If you send 2.5V into the
CV input, Out 2 transposes up one octave, and if you send 3.75V, Out 3 transposes up an
octave.
● Inversion (CLK) ​ : Similar to the ​ Inversion ​ option, except CV control is not continuous. Rather,
the incoming CV is sampled by the clock (using either the internal clock or an external clock
patched into Tête’s
​ CLK ​ input), and is held until the next clock. This enables you to
synchronize inversions to a clock.
● Inversion (Trig) ​ : Similar to the ​ Inversion ​ option, except CV control is not continuous. Rather,
the incoming CV is sampled on the leading edge of any signal patched into an input ( ​ RESET
or ​ TRIG ​ ) that’s assigned to the “ ​ Mod Trig ​ ” function in the CV Setup Menu. It is then held until
the next trigger. This enables you to synchronize inversions to an external trigger source.
● Inversion (Pad) ​ : Similar to the ​ Inversion ​ option, except CV control is not continuous. Rather,
the incoming CV is sampled each time you touch a pad, and is held until the next touch. This
enables you to synchronize inversions to touches on Tetrapad’s virtual keyboard.
Page 118