Intellijel Tete, Руководство пользователя

Страница: 124 / 173

Tête + Tetrapad Manual
● Bank CV ​ : CV Offsets Current/Played Position linearly.
With this assignment, you can use the ​ Bank CV ​ to directly select any available voltage bank.
For example, assume you have Tetrapad configured for 16 Voltage Banks. Positive voltages
will select bank numbers higher than the current bank (roughly one every 1/3 Volt when
16 Banks are used). Once the highest bank number is reached (16 in this example), the next
voltage increase will wrap the bank selection around to Bank 1. Negative voltages, as you
would expect, select lower numbered banks — also wrapping (to Bank 16) once Bank 1 is
reached.
● Bank CV (CLK) ​ : Similar to the ​ Bank CV ​ option, except CV control is not continuous. Rather,
the incoming CV is sampled by the clock (using either the internal clock or an external clock
patched into Tête’s
​ CLK ​ input), and is held until the next clock. This enables you to
synchronize bank changes to a clock.
● Bank CV (Trig) ​ : Similar to the ​ Bank CV ​ option, except CV control is not continuous. Rather,
the incoming CV is sampled on the leading edge of any signal patched into an input ( ​ RESET
or ​ TRIG ​ ) that’s assigned to the “ ​ Mod Trig ​ ” function in the CV Setup Menu. It is then held until
the next trigger. This enables you to synchronize bank changes to an external trigger source.
● Bank CV (Pad) ​ : Similar to the ​ Bank CV ​ option, except CV control is not continuous. Rather,
the incoming CV is sampled each time you touch a pad, and is held until the next touch. This
enables you to synchronize bank changes to touches on Tetrapad’s pads.
● Bank X CV ​ : CV Offsets Current/Played Position on the X Axis.
Banks are arranged within a grid. The number of banks determines the size of the grid.
Specifically:
With this assignment, you can use the ​ Bank X CV ​ to select between four different voltage
banks along the current bank’s row.
For example, if Bank 6 is current and you send positive control voltages to the CV input, they’ll
first select Bank 7, then Bank 8, and then wrap back around to Bank 5. At this point, bank
selection will stop since you will have scolled through all options on the X-axis. Negative
voltages select banks to the left of the current one, wrapping accordingly.
Page 123