Intellijel Tete, Руководство пользователя

Страница: 126 / 173

Tête + Tetrapad Manual
● Bank Y CV (CLK) ​ : Similar to the ​ Bank Y CV ​ option, except CV control is not continuous.
Rather, the incoming CV is sampled by the clock (using either the internal clock or an external
clock patched into Tête’s
​ CLK ​ input), and is held until the next clock. This enables you to
synchronize Y-axis bank changes to a clock.
● Bank Y CV (Trig) ​ : Similar to the ​ Bank Y CV ​ option, except CV control is not continuous.
Rather, the incoming CV is sampled on the leading edge of any signal patched into an input
(
​ RESET ​ or ​ TRIG ​ ) that’s assigned to the “ ​ Mod Trig ​ ” function in the CV Setup Menu. It is then
held until the next trigger. This enables you to synchronize Y-axis bank changes to an external
trigger source.
● Bank Y CV (Pad) ​ : Similar to the ​ Bank Y CV ​ option, except CV control is not continuous.
Rather, the incoming CV is sampled on the leading edge of any signal patched into an input
(
​ RESET ​ or ​ TRIG ​ ) that’s assigned to the “ ​ Mod Trig ​ ” function in the CV Setup Menu. It is then
held until the next trigger. This enables you to synchronize Y-axis bank changes to an external
trigger source.
Page 125