Intellijel Steppy 3U Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 37

Intellijel Steppy 3U Скачать руководство пользователя страница 35

/

Steppy 3U Manual

Copying Patterns

1.

Press the SELECT button to enter Select Mode.

2.

Hold the button corresponding to the track you want to copy from (A, B, C or D).

3.

While holding the source track’s button, press the button corresponding to the track you
want to copy to (A, B, C, or D).

The display flashes rapidly.

4.

Release both buttons.

You   have   now   copied   the   pattern   from   one   track   to   another.   Note   that   this   only   copies
that   pattern   itself.   Various   edited   parameters   (such   as   Swing,   Probability,   etc)   are   not
copied.

Copying Pages

Similar to the way you can copy patterns from one track to another (described above), you can
also copy from one

Track Page

to another. Copying pages is useful if, for example, you

originally created a one page pattern, decide to extend its length to two pages, and wish to copy
the pattern from the original page to the second page.

1.

Press the SELECT button to enter Select Mode.

2.

Hold the button corresponding to the page you want to copy from (1, 2, 3 or 4).

3.

While holding the source page’s button, press the button corresponding to the page you
want to copy to (1, 2, 3, or 4).

The display flashes rapidly.

4.

Release both buttons.

You have now copied the pattern from one page to the other.

NOTE:   Copying   pages   does   not   automatically   extend   the   pattern   length.   For   example,   if   you
have   a   one page   pattern   that   ends   on   Step 16,   copying   Page 1   to   Page 2   will   not   automatically
extend   the   pattern   length   to   32   bars.   If   you   wanted   the   pattern   to   now   play   for   32   steps,   go   to
Page 2   (by   holding   down   the   SELECT   button   while   clicking   the   PAGE 2   button),   then   long-press
(>1 sec)   the   16th   button   (upper-right)   to   define   that   step   as   the   “final   step”   in   the   pattern.   In   this
case,   because   we’re   on   Page 2,   the   16th   button   corresponds   to   Step 32.

Page 34

«
...
33
34
35
36
37
»

Содержание Steppy 3U






































Отзывы:

Нет отзывов