Intellijel Steppy 3U Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 37

Intellijel Steppy 3U Скачать руководство пользователя страница 17

/

Steppy 3U Manual

3. PAGE buttons

When   in   Select   mode,   these   four   buttons   select   which   of   the   four   pages   (1,   2,   3,   or   4)
you   wish   to   display/edit.   Each   page   displays   16   steps   at   a   time,   meaning   there   are   a
total   of   64   available   steps   per   pattern.   A

yellow

button indicates the selected page. A

quickly flashing

yellow

button indicates that the pattern’s last step is on that page.

4. MUTE buttons

When in Select mode, these four buttons function as Track Mutes for the track
immediately to the left of it. In other words, the top-most button mutes/unmutes

Track A

;

the next-lower button mutes/unmutes

Track B

; etc. When a Track is muted, the

corresponding Mute button turns

yellow

.

5. PAGE FOLLOW button ( )

When in Select mode, press this button to enable the Page Follow function. Page Follow
is on when the button glows

yellow

.

If   Steppy   is   in   Play   mode   and   currently   playing   a   Track   that   extends   across   multiple
pages   (that   is,   it’s   longer   than   16   steps),   then   activating   Page   Follow   allows   Steppy   to
update   its   display   to   “follow”   the   page   changes.

NOTE:   If   you’re   in   Select   mode   and   you   press   a   Page   button   to   select   a   page,   Steppy
will   automatically   turn   off   the   Page   Follow   function,   enabling   to   you   make   the   desired
changes   to   the   selected   page.

6. LOOPY button (

)

When in Select mode, press this button to enable the performance looper feature
(“Loopy”). When Loopy is active, its button glows

yellow

.

When   Loopy   is   activated,   Steppy   gives   you   the   ability   to   loop   small   segments   of   a   larger
pattern   when   you’re   back   in   Play   mode.   Specifically,   playback   will   loop   between   any   two
buttons   you   hold   while   in   Play   mode.   If   you   hold   only   a   single   button   down,   that   single
step   will   repeat   until   you   release   the   button.   When   Loopy   is   active,   the

yellow

Select

LED and

red

Edit LED flash rapidly back-and forth. If Loopy is active and you hold a pair

of buttons in Play mode (to create a loop), the gates within the loop will have

green

buttons and gates outside the loop will have

yellow

buttons.

Page 16

«
...
15
16
17
18
19
...
»

Содержание Steppy 3U






































Отзывы:

Нет отзывов