Intellijel Steppy 3U Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 37

Intellijel Steppy 3U Скачать руководство пользователя страница 15

/

Steppy 3U Manual

that corresponds to the final step in the pattern. Gates that are contained within the chosen
pattern length glow

GREEN

, while gates that are outside the length of the current pattern glow

YELLOW

.

The illustration below shows identical patterns; but in the left example, the track length is set to
16-steps, and in the right example, it’s set to 5-steps:

Track   patterns   can   be   as   long   as   64-steps.   To
create   patterns   that   are   longer   than   16-steps,
use   the   PAGE   select   options   (as   discussed   in

) to navigate to the page that

contains   the   desired   final   step,   then
long-press   the   desired   step   button.   For
example,   if   you   wanted   a   32-step   pattern,   hold
the   SELECT   button   while   you   press   the
PAGE 2:4   button   (which   changes   Steppy’s
display   to   the   second   page   of   steps,
numbered   17-32).   Long-press   (>1 sec)   the
bottom   button   in   the   right   column   to   set   the
Track   length   to   32-steps.

NOTE :   If   a   Track   has   multiple   pages   (meaning
it’s   more   than   16-steps),   then   you   can   choose
whether   or   not   you   want   Steppy   to
automatically   update   its   page   view   such   that
the   currently   playing   gate   is   always   visible,   or
if   you   want   the   display   to   remain   on   a
particular   page.   This   is   done   with   the   Page
Follow   (      )   function,   described   later.

Page 14

«
...
13
14
15
16
17
...
»

Содержание Steppy 3U






































Отзывы:

Нет отзывов